Gen 2 Upfitter Switch Tailgate Release Kit - just do it!

Ever sit in your F-150 and wish you could 'pop' the tailgate, much like if you're in a car and you want to 'pop' the trunk?  Well, now you can! 

Long story short, you can order this kit here for $25

note: This mod only works on the 2017 Raptor with 802A package.

This modification behaves exactly as a trunk release button in a Ford sedan would. Meaning, it will not function while the Truck is moving. It will not function if the truck is not in accessory mode or turned on. The system cannot be damaged by leaving the upfitter in the on position either. Leaving the upfitter switch toggled on is the same as pressing and holding the trunk release button in a Ford sedan. Once the signal to open the trunk is sent no more power is sent to the actuator, all signals are ran through the BCM processors. This is a modification that operates as an OEM system would.

FAQ:
Q:Does this modification require permanent modification to my vehicle?
A: No. Zero factory wiring will need to be cut or spliced (aside from the upfitter switch wires)

Q: How long will this take to install?
A: Approx 30min. Less time for some who is experienced with following simple instructions and the use of a wrench (haha).

Q: Will leaving the upfitterswiatch on cause damage? or overload the tailgate actuator?
A: No. Absolutely not. By flipping the up fitter ONE single signal is sent to "pop" the tailgate, after this signal is sent no more power will be sent to the tailgate.

Q: Will this modification work while the vehicle is in motion? While the vehicle is powered off?
A: No. This modification will only work when the ignition is in the ACC/ON/RUN position and the vehicle is not moving faster than 1MPH, regardless of gear selected.


$25 Shipped via PayPal Goods and services
(Please add $6 for international shipping if outside USA).

Each kit Includes:

-DETAILED, PRINTED FULL COLOR INSTALL INSTRUCTIONS
-All required wiring and relay. Everything is prewired and labeled for ease of installation.
-Wire ties and heat shrink tubing to insulate and secure splices.
-This kit requires ZERO cuts or splicing into factory wire harnesses and takes less than 30 minutes with basic tools to install. (splicing of up fitter switch wires required)

PayPal: www.paypal.me/BrendanWebster911
Please ensure to leave shipping address!

Took me about 30 minutes to install (very complete kit!)  Just do it!  Support a Veteran!

Adding visibility for lower cost...

Looking to add more visibility (other than the head-turning looks!) - there are some great options to add functionality for relatively low cost. 

I'm opting for the OPT7 model just for a bang-for-the-buck option... what's your take?

Redline OPT7 60" LED Tailgate bar is only $59

 it's weather sealed and comes with 2 year warranty...

  

Redline OPT7 60" Triple for $89

   

You can go a step up with Putco for $209

   

McGard Tailgate lock - well worth it!

Tailgate thefts are on the rise!  Why? Well the average modern tailgate costs north of $2,000 - yep!

That's crazy!  The Raptor tailgate has a camera, an LED light, a built in shock to gently lower the tailgate, an integrated step and the applique which cost $500 just from the factory order - so YES I want to protect it!

Pickup tailgate theft is on the rise, insurance industry says

In comes a simple solution - use a 60 cent hose clamp!

Well yes while a hose clamp will work, I'm not about to put it on my new truck - so in comes the McGard 76029 Tailgate Lock

McGard is a well known name in vehicle security and for less than $20 you can securely know that your tailgate is much safer than before!

Took about 5 minutes to install...

Here is the kit unboxed, a collar for the tailgate hinge, the lock, a custom key for the lock, a cap to cover the lock and instructions.  I used my cordless drill to loosen/tighten the collar.

Once you get the tailgate open, you literally hold it 45 degrees and it slides out - no wonder they're stolen so easily!  It's crazy how simple!

Next - affix the collar around the cup on the bed - use the tape provided to hold the opening in place so it lines up with the cup opening.

Now you can set the tailgate back into position - notice how the cup covers the tailgate hinge.  Now you can discard the tape.

Here's what the cup looks like once the tailgate is setup and laid flat...

Now wrap the collar around the cup with the key facing up - thread the clamp and tighten

Make sure the lock is facing upward in the same position as the tailgate bed - place the cover over the keyhole and you're done!

Now you'll just want to keep the key in a safe place and register your key code with McGard!

My 2017 Raptor Wish List

Here's a list of things I'm hoping to get for the 2017 Ford Raptor...
works best with your ad blocker turned off for this site :)

 

    

and some SPD High Flow Turbo Exhaust Adapters

It's just a start! 💗💙💚💛💜