From headlamp to tailgate. From suspension to drivetrain. See how the unique features of the Gen2 Raptor work in perfect unison… to take off-road performance to an intimidating new level. The Raptor is even more of a beast off-road. To manage the power distribution between the front and rear wheels, an all-new, four-wheel-drive, torque-on-demand transfer case. The Raptor also sports 3.0-inch FOX Racing Shox which provides great off-road performance and a smooth ride on-road.
Showing posts with label kit. Show all posts
Showing posts with label kit. Show all posts
Monday, March 6, 2023
A few videos with my GoPro and the Whipple Stage1 Kit with SPD trombone and Flowmaster Flow-FX Muffler!
For your viewing (and audible) pleasure... 💀
Monday, April 30, 2018
Gen 2 Upfitter Switch Tailgate Release Kit - just do it!
Ever sit in your F-150 and wish you could 'pop' the tailgate, much like if you're in a car and you want to 'pop' the trunk? Well, now you can!
note: This mod only works on the 2017 Raptor with 802A package.
This modification behaves exactly as a trunk release button in a Ford sedan would. Meaning, it will not function while the Truck is moving. It will not function if the truck is not in accessory mode or turned on. The system cannot be damaged by leaving the upfitter in the on position either. Leaving the upfitter switch toggled on is the same as pressing and holding the trunk release button in a Ford sedan. Once the signal to open the trunk is sent no more power is sent to the actuator, all signals are ran through the BCM processors. This is a modification that operates as an OEM system would.
FAQ:
Q:Does this modification require permanent modification to my vehicle?
A: No. Zero factory wiring will need to be cut or spliced (aside from the upfitter switch wires)
Q: How long will this take to install?
A: Approx 30min. Less time for some who is experienced with following simple instructions and the use of a wrench (haha).
Q: Will leaving the upfitterswiatch on cause damage? or overload the tailgate actuator?
A: No. Absolutely not. By flipping the up fitter ONE single signal is sent to "pop" the tailgate, after this signal is sent no more power will be sent to the tailgate.
Q: Will this modification work while the vehicle is in motion? While the vehicle is powered off?
A: No. This modification will only work when the ignition is in the ACC/ON/RUN position and the vehicle is not moving faster than 1MPH, regardless of gear selected.
$25 Shipped via PayPal Goods and services
(Please add $6 for international shipping if outside USA).
Each kit Includes:
-DETAILED, PRINTED FULL COLOR INSTALL INSTRUCTIONS
-All required wiring and relay. Everything is prewired and labeled for ease of installation.
-Wire ties and heat shrink tubing to insulate and secure splices.
-This kit requires ZERO cuts or splicing into factory wire harnesses and takes less than 30 minutes with basic tools to install. (splicing of up fitter switch wires required)
PayPal: www.paypal.me/BrendanWebster911
Please ensure to leave shipping address!
Took me about 30 minutes to install (very complete kit!) Just do it! Support a Veteran!
Long story short, you can order this kit here for $25
note: This mod only works on the 2017 Raptor with 802A package.
This modification behaves exactly as a trunk release button in a Ford sedan would. Meaning, it will not function while the Truck is moving. It will not function if the truck is not in accessory mode or turned on. The system cannot be damaged by leaving the upfitter in the on position either. Leaving the upfitter switch toggled on is the same as pressing and holding the trunk release button in a Ford sedan. Once the signal to open the trunk is sent no more power is sent to the actuator, all signals are ran through the BCM processors. This is a modification that operates as an OEM system would.
FAQ:
Q:Does this modification require permanent modification to my vehicle?
A: No. Zero factory wiring will need to be cut or spliced (aside from the upfitter switch wires)
Q: How long will this take to install?
A: Approx 30min. Less time for some who is experienced with following simple instructions and the use of a wrench (haha).
Q: Will leaving the upfitterswiatch on cause damage? or overload the tailgate actuator?
A: No. Absolutely not. By flipping the up fitter ONE single signal is sent to "pop" the tailgate, after this signal is sent no more power will be sent to the tailgate.
Q: Will this modification work while the vehicle is in motion? While the vehicle is powered off?
A: No. This modification will only work when the ignition is in the ACC/ON/RUN position and the vehicle is not moving faster than 1MPH, regardless of gear selected.
$25 Shipped via PayPal Goods and services
(Please add $6 for international shipping if outside USA).
Each kit Includes:
-DETAILED, PRINTED FULL COLOR INSTALL INSTRUCTIONS
-All required wiring and relay. Everything is prewired and labeled for ease of installation.
-Wire ties and heat shrink tubing to insulate and secure splices.
-This kit requires ZERO cuts or splicing into factory wire harnesses and takes less than 30 minutes with basic tools to install. (splicing of up fitter switch wires required)
PayPal: www.paypal.me/BrendanWebster911
Please ensure to leave shipping address!
Took me about 30 minutes to install (very complete kit!) Just do it! Support a Veteran!
Subscribe to:
Posts (Atom)
Added Deaver +3HD leaf springs today!
The Raptor tends to 'squat' a bit with the travel trailer, so after many days of research I bottomed out (sic) on the Deaver +3HD l...
-
note: this page works best with your ad-blocker turned off :) The Sony Sound system in the 802a package is pretty nice, but it's lack...
-
From my previous blog about Forscan it's a free tool that lets you monitor, modify the computers in your vehicle. The 2017 Ford Rapto...
-
From a previous post, I jumped on the Black Friday deal at http://fordraptorlights.com and had a custom setup delivered. https://2017-fo...
