Showing posts with label boost. Show all posts
Showing posts with label boost. Show all posts

Tuesday, September 3, 2019

update for the Ford Raptor Whipple Tune

It's been about a year since my last update, and Ford is always tweaking, optimizing their ECU/TCU tuning - so I figured I should contact Whipple Superchargers for an annual update - and it was due for an update!


I'll report back with any noticeable differences, but most likely it will have transmission refinements to improve shifting logic and smoothness.  Yahoo!

Update: the tune does have quite a few updates, primarily transmission and more boost down low.  Overall VERY happy with this update!!





Friday, January 12, 2018

SPD Exhaust Adapters for the 3.5L Ecoboost F-150 Ford Raptor

Engines are air-pumps - plainly said, more air in = more air out.  In general, if you can move more air/fuel - you make more power...

This is why SPD Performance created these SPD Exhaust Adapters - see below...




So you wonder - what the heck is this?

If you see below, the SPD adapter is on the left and the OEM adapter is on the right...
These larger adapters will maximize flow, greatly reduce exhaust back-pressure and help to lower Exhaust Gas Temperatures (EGTs). 

The outlet is 2.3125" ID compared to the stock outlet which is 2.0625" ID.
This is a 25% increase in area for the exhaust to leave the turbo...


You'll need a stud puller - well worth the $20 to save your knuckles!


The guys at the garage had all the right tools to install these puppies... thank God!


They seem to be doing the job - the exhaust sounds a little deeper too!




Thursday, January 11, 2018

F-150 Ford Raptor VTA (Vent to Air) MOD - so simple!

OK - gosh I feel like I should be 17 again...  you know, that cool WHOOSH sound that a turbo car makes, well dammit - mine can do it too! LOL

There's a simple VTA (Vent to Air) MOD that takes the hose off the blowoff/bypass valve that vents the excess turbo pressure and you plug the return hose - instant PSSSHHH!

First - buy a really nice billet plug http://www.stage3motorsports.com/S3M-VTAMOD-2013-2014-F150-3-5L-EcoBoost-S3M-VTA-MOD-Plug.html - I got mine used for $20 shipped.

Some guys use this (honestly you can!)



Simply remove the plate under the front driver skid plate, you know - the one you take off to change the oil filter... 6 bolts, super easy.  You reach up and simply untwist the hose connecting to the BOV off the intercooler.  You can see the hose disconnected below.


Next, you take your fancy plug and stick it in the hose you just removed.


Now, just so I can be cool - I ziptied the hose to the BOV so it won't be jangling around by the fans

And here's the sound result!  Amplified of course thanks to the open air element from Whipple :)



Incredibly simple to do, and if you like the PSSSSH!  then do it!  if not, plug it back in!

See ya!

My visit to Whipple Supercharger in Fresno

I setup a fantastic Group Buy for the Whipple Stage 1 Kit online - we hoped to get at least 10 guys in to get the discount, little did I know that 42 people signed up in 2 days!!  If you know Whipple Superchargers then you understand why they're so good!  They've been around for decades and are most popularly know for their twin-screw superchargers.

Well, the 2017 Ford Raptor - is a twin-turbo V6, so why the heck would Whipple mess with a turbo car?  It's a totally different forced induction running from exhaust gases versus compressing incoming ambient air like a supercharger does... well, it's because Whipple has had a masterful relationship with Ford and they work together to build an amazing ECU tune for this truck!

The kit comes with a new Cold Air Intake (CAI), a bigger intercooler (which is critical in keeping temps lower), and of course the masterful computer retune.  I visited the Whipple home site in Fresno, CA and dropped it off for the upgrades.

Naturally the motor needs to cool down after our 3 hour drive, so they worked on it later that afternoon while my son and I trolloped around Fresno (hint: not that much to do!)

The next morning, I was like a kid at Christmas - up early, wanting to run down and check the tree for presents - but alas, I was in a hotel room and ate some oatmeal with bad coffee  LOL

But we decided to go over to the Whipple shop earlier so we could maybe sneak a peak.  Little did we know that Dustin Whipple himself would give us the grand tour!  


haha - even the bushes say WHIPPLE 

Some nice customer toys in the lot
that supercharged GT350 puts down 987HP!!!

can't go wrong with a blacked out GT

More Raptor Fun!

Yes, that's an engine dyno!

Brand new 2018 Mustang GT ready for a supercharger buildup!

A whole building full of CNC machines making custom/small-order parts!

 Taking bit's of metal like this...

and turning it into this!
 

ooh, dive right in!  LOL


Now, onto the dyno!  Here are my old parts...

and the computer for the dyno


The beast on the dyno!




she's a little fat :)
 

re-gapping the spark plugs...
 

pic of the new intake


Here's the fun! 




Overall, the tune was tweaked and dialed in - the truck goes from 450HP/510ft-lbs stock

 to 

530HP 580ft-lbs tuned!!

VERY happy with the results!

The nice part is this is CARB legal with an actual E0 number 

A lot of folks have been concerned about the 'open' box design - but as you can see the gasket presses up to the hood so it's not fully 'open' under there - definitely gives more 'whoosh' sound from the turbos :)




edit: As you know, turbo vehicles can appreciate a good tune - and Whipple did a fantastic job of keeping this setup CARB legal AND giving the punch it needs.  They even update the Transmission Control Module (TCM) regularly so you can get the benefit of all the Ford updates to the new 10-spd transmission coding!  Hope you enjoy!






Wednesday, November 22, 2017

Whipple Stage 1 Kit for 2017/2018 Ford Raptor Group Buy is ON till 11/27

Whipple Stage 1 Kit for 2017/2018 Ford Raptor



CARB APPROVED!  

Group Buy will close Monday, 11/27/17 - let me know if you want in on this!  Already up to 18 interested folks who are committed to buy!
Once the group buy closes on Monday, I'll update the list to be finalized and Whipple will send out emails to contact the buyers.

Original price $1,999 includes tuner, intake, intercooler

5-9 = 15% off $1,699
10-19 = 20% off $1,599
20+ = 30% off $1,399

Here's the new programmer!  No need to ship your PCM!


Some of the basics it can do and keep in mind, its an OEM based tool so it will never have all frills some of the other tools will have.

Currently:

  • Read/erase codes
  • Upload stock file, save to SD card (can back up on PC)
  • Download modified cal
  • Tire/axle changing
  • Crank relearn
  • Data logging, 2gb SD card included
  • Read live data

Future:

  • Cals comes from Whipple server
  • Whipple server notifies you if an update becomes available
  • More advanced logging and graphing features.

Whipple, known for its industry leading upgrade systems and technological innovations, has now brought the same technology to the 2017 and up 3.5L V6 F150 and Raptors with the Whipple Stage 1 system.

The stage 1 systems couples the Whipple Mega Cooler, roto molded high velocity cold air intake and industry leading custom calibration to make an amazing 150* foot pounds of torque and 70* horsepower more than stock. Even better, at 3500 rpm, the system produces over 180 foot pounds of torque over stock giving more power under the curve for incredible throttle response.

The Whipple Monster Cooler offers 54% greater volume and 8% more surface area. The bar and plate type intercooler features offset fin on both the cold and hot side, allowing for increased cooling capacity while fitting into the stock packaging, yet significantly out performing the stock cooler. Test show a 90 degree (F) drop in temperature just on the dyno, yet even bigger gains are shown during real world applications. The colder air allows increased spark advance and more O2 to the engine, resulting in more power while maintaining safety.

The Whipple high velocity air intake system boast the CAD driven, CFD modeled rotor molded plastic air intake that maximizes air speed while reducing inlet restrictions. The air system features the velocity stack gauze those filter with extra wide pleats, giving the air filter the capacity to flow over 132% more air than a stock paper filter.





The Stage 1 system heart and soul is the industry leading calibration. Whipple and it's Ford calibration team worked feverishly using advanced tools to develop a calibration that could maximize power while being legal and safe at the same time. After countless dyno and real world testing in multiple environments, the engineers were able to extract massive levels of torque and horsepower yet maintaining factory type safety settings.

The Whipple Stage 1 system is the first and only 50-state legal Ecoboost complete upgrade package available today CARB APPROVED! allowing for upgrades in all 50-states. No cutting or grinding required.




Friday, August 18, 2017

BURNOUT TIME!

PEDAL COMMANDER - it's the best money I've spent on the Raptor YET!

You can get a great deal using AUG10 at Freedom Motorsports!


O M G!!!  

If you like burnout videos like this one by Ken Block


you need to get the Pedal Commander!


Seriously it's a 5-minute install and 0 to 10 seconds of smiles from ear-to-ear!  My heart is still pounding from my first test drive... Sport PLUS mode is WAY too much for the street - I'll have no tires left if I keep it in Sport+  LOL

Finally installed my subwoofer upgrade

 So many projects, so little time... but I've been wanting to update my subwoofer and amp for as long as I've owned the truck - it&#...