Showing posts with label baja designs. Show all posts
Showing posts with label baja designs. Show all posts

Wednesday, November 29, 2017

Installation of the Ford Raptor Lights Kit - you can do it!

From a previous post, I jumped on the Black Friday deal at http://fordraptorlights.com and had a custom setup delivered.  https://2017-ford-raptor.blogspot.com/2017/11/gonna-lite-up-nite-with.html

When the kit arrived, I was super excited.

I've never owned a truck, and I've never wired up lights before - but the new Ford Raptor makes it REALLY easy with the AUX switches that are built into the ceiling console.  For some, this is a trivial install - but it's fun to try something NEW!   Here's the process and steps I took to install...

Custom Triple Bezel Kit Full With Wire Harness Brackets 
KC HiLiTES Flex Lights and all hardware × 1
KC HiLiTES FLEX amber covers × 1
BAJA SQUADRON SPORT DRIVING COMBO PAIR
BAJA SQUADRON PRO SPOT PAIR

    

Unboxed everything, all in great shape!  Seriously good quality in this build - the frames are SOLID and each piece fits together perfectly!

Here's a closer look at one of the frames with the KC HiLites 10W LED and amber cover.

 One of the amber covers installed, and the other shown - they come with a protective layer on the backside to ensure they're not scratched up - very nice!

Both lights with lenses mounted - this will give a wider spread pattern for fog/snow/rain.

2nd slot gets BAJA DESIGNS SQUADRON SPORT DRIVING COMBO PAIR
notice the bottom 2 lenses are fluted to distribute the light path to the sides, and the top are more of a spot (long throw) pattern...


CENTER slot gets the super powerful BAJA DESIGNS SQUADRON PRO SPOT PAIR, these lights are 4300 lumens which is VERY bright and are long throw for distance

I started to lay out the parts to ensure they're in the right locations, the plastic triangle parts clip into the metal brackets and the KC Hi-Lites fit only in the outer most slots, the BD lights fit into the 2 central slots for the brackets.

 Here's a better picture of the brackets with the plastic clipped into the shell...

 Since the lights are different sizes, they have to be mounted at different heights - the kit comes with washer and spacers to allow for this height adjustment - you can see the collection of washers, risers, lock nuts per light...  pretty simple once you figure it out, and it's all documented in the guide!


A closer view of the driver's side setup - the black bolt shows where the light bracket will reside.

I was excited to see how it all went together so I mounted all the lights...

yes, both sides...

Prior to installing the brackets the kit comes with some nice gaskets that fit the Raptor opening perfectly.  Start at the bottom, trust me it's much easier than any other option.

Fits perfectly - as I stated before - this is a GREAT kit!

When you mount the brackets on the Raptor - there's already 1 hole under the bumper cover brace, the bracket goes in FRONT of the brace and you thread THROUGH that hole into the bracket.  The 2nd hole isn't threaded either but you just turn the screw through the plastic till it catches the bracket.  This was probably the toughest part...

 So - here's the driver's side bracket mounted... notice the BD lights are missing... yeah, after a few phone calls with the Ford Raptor Lights team (THEY'RE AWESOME!) they said it's much easier to mount without lights installed - and they're RIGHT!  

Here are both brackets installed with all lights mounted

Driver's side closeup... 

This was something that I was a bit hesitant on... the kit comes with a pre-wired loom with all the same connectors that fit the KC Hi-Lites but the BD lights need a Weather Tech connector - so you have to cut the end and wire in new connectors.  I'm not new to stripping/crimping but it was one of those unexpected things to do... I sat and watched some Netflix and did the 4 new ends LOL


So the wire loom was completed, and the lights were mounted I just needed to wire these puppies up!
I chose to setup the first 3 of the 6 AUX lights


AUX 1: KC HiLiTES Amber Flex Lights
AUX 2: BAJA DESIGNS SQUADRON SPORT DRIVING COMBO PAIR
AUX 3: BAJA DESIGNS SQUADRON PRO SPOT PAIR

The reason I did this instead of just wiring all of them to 1 switch is that I can customize what light is needed.  If i just need the amber fogs, AUX1. If I need more light for dark roads flip AUX2.  For long shot visibility, flip on AUX3.  All 3 on for BAM! Visibility! :)

I first routed the wire loom to each set of lights and then up the passenger side of the engine bay.  Under the hood, by the passenger side rear of the engine bay there will be 6 wires tucked away - these are the AUX upfitter wires.

SwitchCircuitWire Color
Aux 1CBB47AGreen/Blue
Aux 2CBB48AGray/Yellow
Aux 3CBB94Violet/Orange
Aux 4CBB96Brown/Blue
Aux 5CBB98AGray/Orange
Aux 6CBBA0BYellow/Violet
Here are the AUX1-3 wires connected to the wire loom.  I used some heatshrink butt connectors and added more heatshrink tubing over those to ensure everything is watertight.  

And the finished result!!!

Hope you enjoyed reading as much as I enjoyed installing - leave feedback!

Monday, November 20, 2017

Gonna lite up the nite with FordRaptorLights setup!

While the LED headlights are pretty good IMHO on the '17 Raptor I'm going to light up the night with this 6-light setup from https://fordraptorlights.com  they have an early Black Friday '17 Sale going where you get $75 off and a $50 MIR from Baja Designs!  


Here's my order - see what you think?

Custom Triple Bezel Kit Full With Wire Harness Brackets 
KC HiLiTES Flex Lights and all hardware × 1
KC HiLiTES FLEX amber covers × 1
BAJA SQUADRON SPORT DRIVING COMBO PAIR
BAJA SQUADRON PRO SPOT PAIR

    

I chose these three setups for brightness and distance, the outside KC Flex will have a good spread pattern with amber covers to have a wide path for fog.  The Squadron Sport will be great for daily driving - bright but not overly so.  The Squadron Pro Spot will really send the light when truly needed...  All done with the AUX switches onboard!!

KC FLEX™ Single LED feature bright CREE LEDs in a spot or spread beam pattern inside a compact, rugged Aluminum housing with precision reflectors.  Rated at 10 watts and 975 lumens in a wide spread pattern, great with amber covers to match the Raptor!

Squadron® Sport utilizes 4 Cree LEDs producing an impressive 1,800 lumens at 20 watts making it ideal for near field, side/backup and scene lighting applications.

Squadron® Pro packs 4,900 Lumens at 40 watts that will truly annihilate the night. Don’t let this light fool you, although compact in size this LED auxiliary light will literally blind you with brightness.  The Pro comes equipped with a sleek black gloss aluminum housing and outshines the competition through both appearance and performance.

Use code 75BUCKS to get the initial discount!



Super Excited for the holidays!  Gotta find some DARK places to visit :)


Finally installed my subwoofer upgrade

 So many projects, so little time... but I've been wanting to update my subwoofer and amp for as long as I've owned the truck - it&#...